About this item
2-In-1 Accurate, Reliable & Highly Sensitive Alarm：Combination smoke detector and carbon monoxide detector can sensitively detect the threat of these two gases.
Sound And Light Alarm：When a dangerous level of carbon monoxide is detected, the red light will flashes and a loud alarm pattern will sound—Loud 85 decibel carbon monoxide alarm with red light flash to protect your family’s life and property safety from CO detector.
Application CO Detector Place：This carbon monoxide detector suitable for all place where it is possible to produce carbon monoxide, such as your home kitchen, bedroom, bathroom, hotel, or you are in the barbecue time, your parking garage.
Energy Saving：Operated by 3 AAA Batteries, You can hear the alarm when the power is low, don’t worry about when to replace the battery.
Quick Easy Installation：Requires no rewiring, easy to mount on any wall or ceiling with the included mounting bracket, screws and anchor plugs.
|
Product model
|
S12
|
|
Battery supply
|
One CR123A battery
|
|
Quiescent Current
|
≤10uA
|
|
Alarm current
|
≤40mA
|
|
Alarm sound
|
Sound and light prompt
|
|
Sensor
|
Electrochemical carbon monoxide sensor and infrared photoelectric sensor
|
|
Operating temperature
|
0-50℃
|
|
Working humidity
|
Relative humidity 10%-95% non-condensing
|
|
Carbon monoxide gas detection concentration
|
000~999 PPM
|
|
Smoke sensitivity
|
0.1%db/m-9.9%db/m
|
|
Alarm indication
|
LCD display, sound and light prompt
|
Function introduction
Smoke and Carbon Monoxide Alarm：With this device, you can protect yourself from smoke and carbon monoxide – two deadly household threats – simultaneously.
Highly Accurate Electrochemical and Infrared Photoelectric Sensor：We are using an advanced CO sensor technology so we can make sure that it can recognize even the smallest amount of CO.
LCD Display To Check Safety Regularly：With the integrated and backlit LCD display in front, you can check the CO concentration in your room at any given time. This gives you confidence that the alarm is working fine and it’s protecting you.
Included Battery That Will Last For 10+ Years：This device comes with a CR123A battery with over 1.600mAh which provides power for it and can withstand up to 10+ years of usage.
Single Button Test/ Silence：We wanted to keep it simple and eliminate confusion so we have integrated one single button which does it all. Depending on which mode the device is in, you can either test or silence it.
Alarms You In Three Different Ways：In case of an alarm, this device will activate its integrated LCD display telling you the concentration of CO or smoke in the room. At the same time, the status LED will flash and you will hear a loud beeping noise alarming you both visually and audibly.
Installation method
The first： Installation with screws
1、Insert Battery：If you haven’t done it yet, insert the included CR123A battery in the battery compartment of the device
2、Drill Holes In Your Wall / Ceiling：Use the ceiling mount as a template to mark the exact position for the holes in your wall/ ceiling. Take a suitable drill and drill both holes carefully.
3、Install The Ceiling Mount：Stick the included anchors in the holes and mount the ceiling installl with both screws.
4、Insert The Detector Device：Simply screw the detector in the ceiling mount until you hear a “click. Now it is secured. Take care of aligning both triangles on the ceiling mount and the detector device to insert it properly.
The second：Installation With Tape
1、Insert Battery：If you haven’t done it yet, insert the included CR123A battery in the attery compartment of the device.
2、Clean The Surface You Want To Mount The Device On：For the magnet sticker tape to hold properly. you have to clean the surface you want to mount the device on from oil and dust. Wipe it useing a fresh cleaning cloth and some cleaning alcohol to do so and let it dry completely afterward.
3、Mount The Metal Plate On The Wall/ Ceilling：This device comes with two metal plates with pre-applied double sided tape. Use the one without magnets on the flipside, peel off the liner and press it against the wall/ ceiling firmly.
4、Mount The Detector Device：Use the second plate and insert it in between the detector and the ceiling mount before screwing both parts together.After the unit sits in the ceiling mount correctly. you can simply hola the device near the pre-mounted metal plate on your wall/ceiling and the magnets will attract the device and secure it.
Packing list
1 x Colored Packing Box
1 x Smoke And Carbon Monoxide Alarm
1 x Instruction Manual
1 x Screw Accessories
Outer box information
Qty：50pcs/ctn
Size：39.5*34*32.5cm
G.W：13.5kg/ctn
Company Introduction
Our mission
Our mission is help everyone live a safe life.We provide best-in classpersonal safely,home security,and law enforcement products tomaximize your safety.We strive to educate and empower ourcustomers-so that,in the face for danger,you and your loved ones areequipped with not only powerful products,but knowledge as well.
R & D capacity
We have a professional R & D team, which can customize products according to customers’ needs. We designed and produce hundreds of new models for our clients all over the world, our clients such us: iMaxAlarm, SABRE, Home depot .
Production department
Covering an area of 600 square meters, we have 11years experience on this market and have been one of the leading manufacturers of electronic personal security devices. We not only owns advanced production equipment but also have skilled technicians and experienced workers.
Our Services & Strength
1. Factory price.
2. Your inquiry about our products will be replied within 10 hours.
3. Short lead time: 5-7days.
4. Fast delivery: samples can be shipped anytime.
5. Suport logo printing and package customizing.
6. Suport ODM, we can customize products according to your needs.
FAQ
Q:How about the quality of the Smoke And Carbon Monoxide Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.
Smoke and Carbon Monoxide AlarmWith this device, you can protect yourself from smoke and carbon monoxide – two deadly household threats – simultaneously.Highly Accurate Electrochemical and Infrared Photoelectric Sensor We are using an advanced CO sensor technology so we can make sure that it can recognize even the smallest amount of CO.LCD Display To Check Safety RegularlyWith the integrated and backlit LCD display in front, you can check the CO concentration in your room at any given time. This gives you confidence that the alarm is working fine and it’s protecting you.Included Battery That Will Last For 10+ YearsThis device comes with a CR123A battery with over 1.600mAh which provides power for it and can withstand up to 10+ years of usage.Single Button Test/ SilenceWe wanted to keep it simple and eliminate confusion so we have integrated one single button which does it all. Depending on which mode the device is in, you can either test or silence it.Alarms You In Three Different WaysIn case of an alarm, this device will activate its integrated LCD display telling you the concentration of CO or smoke in the room. At the same time, the status LED will flash and you will hear a loud beeping noise alarming you both visually and audibly.
